peet Posted December 4, 2011 Report Share Posted December 4, 2011 I've done a bit of web research this afternoon and havn't managed to turn up much in the way of research on the effectiveness of LED downlights for planted tanks. I was at Bunnings yesterday and noticed that they have crompton bulbs and that you can get various wattages, colour temps (3000 - 5000 K)... no idea about PAR of these bulbs other than they reckon a 20W is equivalent to a 100W (....light output???) http://www.crompton.com.au/uploads/Lightstar_Energy_Saving_Mouse_Pad.pdf Has anyone tried growing plants under these lights or know of some research about their effectiveness? I would think that they have quite small coverage with their 20 degree angle so would need quite a few. But some nice fittings available and might suit nano tanks Quote Link to comment Share on other sites More sharing options...
Artem Posted December 9, 2011 Report Share Posted December 9, 2011 I would say that LED downlights are probably not the best option out there. If you are looking for a cheap LED alternative then you won't find one. The cheapest kits Ive seen are these: http://www.aquastyleonline.com/ The only concern is that they use Bridgelux LEDs instead of Cree and their drivers are a bit dodge, but you can always order in some Cree separately and they offer meanwell drivers for an extra cost. Quote Link to comment Share on other sites More sharing options...
the-obstacle Posted December 10, 2011 Report Share Posted December 10, 2011 the bridgelux LEDs with meanwell drivers will grow pretty much anything. They're a ton brighter than t5s and about on par with metal halide while using a lot less power. I think I'll do a test tank with the left over LEDs from my marine and see how they work out for growing. Quote Link to comment Share on other sites More sharing options...
sup42 Posted September 13, 2012 Report Share Posted September 13, 2012 Cree Drivers and Bulbs have the best Rep from what I have looked at on Various forums and articles. As I understand it 0.6 watts of Cree Lighting is equates to High Lighting in a planted Tank. Cheaper Chinese Knock Offs using Cree Technology is what I have gone for.....Frankly because I can't afford brands like Maspect, Orphec and Aquaray etc. The light I purchased costs $ 480. A 90 watt 7000 kelvin new Model of Fresh Water Lighting for Fresh water plants ( 80cm long ) f. Being a new Light at entry Level on the Market there is very little info on it in terms of Par Values. It has three Rows of Cree lamps 3watt White Cree Bulbs and a center strip of Blue. The Controller is A big Unit and It is easy to use as far as the three separate on off times for sunrise sunset. The Lamp has Passive Cooling with Fins and Active cooling with thermostatic control of the inbuilt fans ( they kick in at 45 degC). The Proof will be in the pudding. IN My high tech tank It has been running for two weeks only , I am taking a photographic record of the tank. Increasing ferts etc has meant the plants are still in the adjustment phase to the change in lighting / feeding. DIY LED Lamps was never an option for me. So I guess If you cost up the parts including the fans you will need to cool it....versus the lights like mine....you will have a sense of whether making your own is worth it. Quote Link to comment Share on other sites More sharing options...
F15hguy Posted September 13, 2012 Report Share Posted September 13, 2012 I bought cheap LEDs, last about 2 days before failing Quote Link to comment Share on other sites More sharing options...
Sheepsnana Posted September 14, 2012 Report Share Posted September 14, 2012 I bought cheap LEDs, last about 2 days before failing They look great for a week, then die. It's one of those things that everyone tries to save a few bucks, but ends up costing more. Quote Link to comment Share on other sites More sharing options...
blueether Posted September 14, 2012 Report Share Posted September 14, 2012 don't over drive them, and keep them cool. The hotter they run the more they will draw, the more they draw the hotter they run... ending up with short lived LEDs Quote Link to comment Share on other sites More sharing options...
F15hguy Posted September 14, 2012 Report Share Posted September 14, 2012 or they are just cheap junk Quote Link to comment Share on other sites More sharing options...
livingart Posted September 14, 2012 Report Share Posted September 14, 2012 don't over drive them, and keep them cool. The hotter they run the more they will draw, the more they draw the hotter they run... ending up with short lived LEDs +1 Quote Link to comment Share on other sites More sharing options...
sup42 Posted September 14, 2012 Report Share Posted September 14, 2012 Here's the Controller for the K3 fresh water 90 watt Cree LED ( Got it off TM , I was going to import one from Fishstreet = $500 nz .....TM = $480 from Val Ray ). Quote Link to comment Share on other sites More sharing options...
simwiz Posted September 15, 2012 Report Share Posted September 15, 2012 This is what I am using, and it is working great with my tank: http://translate.google.com/translate?c ... pair=es|en I had to import the bulbs, but it was not expensive at all. If you need to know where I imported from, drop me a PM. Regards! Quote Link to comment Share on other sites More sharing options...
Joe Posted September 15, 2012 Report Share Posted September 15, 2012 This is what I am using, and it is working great with my tank: http://translate.google.com/translate?c ... pair=es|en I had to import the bulbs, but it was not expensive at all. If you need to know where I imported from, drop me a PM. Regards! Wow that is awesome Quote Link to comment Share on other sites More sharing options...
Phantom Posted September 16, 2012 Report Share Posted September 16, 2012 This is what I am using, and it is working great with my tank: http://translate.google.com/translate?c ... pair=es|en I had to import the bulbs, but it was not expensive at all. If you need to know where I imported from, drop me a PM. Regards! I like that. I've been playing around with other LED fittings, never thought of using G24's with PVC tube like that. Might import some myself now. Quote Link to comment Share on other sites More sharing options...
simwiz Posted September 20, 2012 Report Share Posted September 20, 2012 I am very happy with the results of these bulbs. See them here: Quote Link to comment Share on other sites More sharing options...
Barnacle Posted October 5, 2012 Report Share Posted October 5, 2012 I have LED's over 2 of my tanks, thinking about changing to them for my 200L tank too. Plants grow just fine under them, but I do notice the white leds lack colour... To overcome this l'll rig up some RGB leds to provide the additional colour range that the whites don't provide. Summer project I think. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.