livingart

First things going in the tanks are 24 Pleurobranchaea maculata for study on toxicity http://www.sciencelearn.org.nz/Contexts ... -sea-slugs once that is finished then it is onto breeding and raising larval nz marine fish 500 litres of fresh NSW going into system each week have a 200 litre drum of cycled live rock ready to go into sump sump is currently dark, constructing a tower filter for it at the moment

there is a thing about big, mouthed, can tolerate various water conditions fish, that puts them off the list

+1

thanx, 24 tanks and still room for more going to use bigger bins and another sump on bottom rack

Aquaculture setup? Been toying with setting up a few tanks to raise fry in, will need about 10 to 20 tanks so they can be kept seperate. Looking at those warehouse plastic storage bins as tanks and running them all off one sump. Still need to be isolate each if necessary and make it as cheap as possible, plastic container and lid for water inflow plastic hair curler as comb for out flow, elbow screwed into 25mm bulkhead hair curler from $2 shop before diassembly neta irrigation fitting for controlling flow thru silicon airline tube return thru 25mm pipe to 100mm drainage pipe return and 800litre sump some container and return pipes inflow adjusters into 25mm id pipe control tap to ensure flow is kept up to individual pipes wide open and pipe is full drain pipe is 1/3rd full of water the whole setup so far

no thats robbie deans :bggrn:

there is one on monster fish keepers somewhere

copy and paste into google

:dnc1:

should make this thread a "sticky" :sage:

noticeable thought is an interesting concept or are we talking facial expressions?

It learnt pretty quickly, about 4 times but it wouldnt do it where i could film it

both, 6 left out of 14 so far

getting dinner

probably the lowest maintenance tank i ever owned

welcome aboard

fixed the pic nice fella

treat them as normal fish viewtopic.php?f=4&t=9188

could be either

jaycar super bright LED strip lights come in 5m roll just need to cut and solder

taking the o'ring off and letting it relax for a while can help too

mine do the same, o'rings are still good but over time i think they compress a little vaseline works well to rectify problem but food grade silicon grease is better as long term vaseline can harden the rubber my units are 7 years old and still going

FIBREGLASS or butyl inner?

getting picked up in the morning they can sit at depot or in van all day before going on overnight flight i drop off here in Tga at 4pm and arrive in CHCH at business address before 9am next day