Jump to content

Filtration


Jimmy

Recommended Posts

My main filter system (as I see it) is rock, bacteria, and water movement.

All cannisters really do is create a more efficient way of moving the water over a greater surface area of man made rock.

I've added skimmer/s mainly cause the missus has added more protein factories and I couldn't sleep at night waiting for the tank to 'crash'.

Now I'm going for the natural turbid high bacteria marine environment look (lots of fishies and not so many SPSs at this stage)

Hope we will still be able to see the fish and things... :o

Link to comment
Share on other sites

If you use a cannister filter with filter wool and or sponge Make sure you clean reqularly and wash in your tank water not tap (Or you will kill the good bacteria that will be growing in the sponge). Good when your starting a tank But cos the inside is out of site, its out of mind. If you leave it dirty it will break down and start to pollute your tank. How bigs the Tank and how many fish? What corals are you looking at getting? Do you test ? What are your readings? Sorry to sound like a cop with all the questions but want to get the full picture.I used to have bio balls and canister filter but have slowly changed to a berlin style tank which sounds like thats they way you want to go? But if the tank is young I think its a good idea to have the canister on there to get the bacteria levels up untill your rock can devalope. But there are so many options when it comes to filtration it really comes down to what you want to acheive tank size and fish load.

Link to comment
Share on other sites

Sharky - You are aware that filter wool and sponges in saltwater will create excess nitrates after approximatly 5 days of submersion? This is why no-one uses them. If you MUST use filter wool certainly don't try and preserve the bacterria, replace the wool before it goes biological.

Pie

Link to comment
Share on other sites

Just to clarify my understanding...wouldn't the nitrate production aided by the wool/fibre be the end product of the normal tank nitrogen cycle anyway ie the wool etc just hastens the conversion of nitrite to nitrate?

Or is it 'additional' nitrate (from where?) that the cycle wouldn't normally have produced anyway.

Rinsing filters would be a good way to export waste as long as the negatives don't outweigh the postive... :-?

Link to comment
Share on other sites

rossco in response to your question(and nothing to do with bridges :wink: )

basicly the foam/filter wool is so effective at breaking down to nitrate that it will spike and rise it too fast and your rock will not be able to cope with the elevated levels. high nitrates=bad for corals and fish

Link to comment
Share on other sites

A guy with a 200g cuttlefish tank on Tonmo uses a bioball tower and hasn't cleaned it out for 3 years - flows still good and never has a problem with nitrates(undetectable).

I too have a bioball tower, in my case it's a big heap of bioballs in my overflow. This is because my nitrates were so close to absolute zero that stuff including corals couldn't grow, the bioball tower is to try to get some nitrates, although they are still undetectable, salifert.

However this cuttlefish guy must have something else in his tank or management that is removing the nitrate, it would not be possible for him to still have zero nitrate with a bioball tower and nothing else, unless the bioball tower was running anaerobically.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...