Skip to content
View in the app

A better way to browse. Learn more.

Aquarium World

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Phosphate Filters

Featured Replies

hi all again i just done a phosphate test and i am reading 5.0+ so i have starting using Phos-zorb havent tested since its been in (about 12hrs)

would i be better off buying a Phosphate filter or just putting a weee pouch in my filter :lol:

With phostphates that high it is better to do big water changes until you get it down as it is going to take a lot of phostphate remover to reduce it.

reef setup rowaphos in a fluidised reactor and his phosphates dropped heaps too. im running it now and have noticed an improvement in the last few days already.

depends on the amount of phosphates in the water, if a little, then a long time. if lots, then a shorter time :D from memory, it removes up to 15ppm of phosphate?

  • Author

well i have done a 20% water change and it seens my phoshate has droped to 2.5 from 5.0. dont no weather its the water change thats done it or the phos-zorb but will do a weekly check now

Had the same problem.My phos was out of control.I changed thousands of litres over three months.This only reduced it to 0.5 and it would not go any lower.Then i got some phosphate killer(salifert).500mls does a 2000ltr tank for 3 months i think and it only cost $60.00.This reduced them to 0.2 within 2 weeks.It seemed to stay there so i got another one which took to unreadable.It has never come back and i change every 2 or 3 months no matter what the reading.Its cheap security and the coral looks great.

I used salifert phosphate eliminator for 2 weeks then invested in a Deltec Fluidised Media Reactor (FR 509 holds 1.2 Ltrs of Media)

Put in 1 ltr of Rowaphos and got the result I have been waiting years for in a couple of days.

THE ANSWER IS YOU HAVE TO FLUIDISE

i dont (currently) fluidise, but am using rowaphos between a folded piece of filter wool in the output of the skimmer. after several months of brown acros', they are only now starting to colour up (after about 4-5 days use) -conincidence? perhaps. even so, fluidised reactors certainly are more efficient :D just cant justify the cost of one right now - especially considering what they cost for how simple they are :-? if anyone is doing another marinedepot order, let me know coz there are cheap ones on there.

Clever? More like smart (arse) :D Thanks Fay, however I've seen that link and already started looking around for parts.

It sounds like yours is over fluidised Fay. Try throttling back the pump or reducing the flow! I will attempt to make one, I figure if I can get it cheap enough elsewhere then it will save me the time sourcing the parts. However, if i can source them cheap enough I'll make several (much like westy1 has done for his zeovit reactors) and sell them here :D

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.