Skip to content
View in the app

A better way to browse. Learn more.

Aquarium World

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
We’ve recently updated Aquarium World! We’re working through a few bugs, with exciting new features on the way. Thanks for your patience while we fine-tune the site.

5050 SMD LEDs

Featured Replies

Hi Guys,

I have just ordered 300 of the 5050 SMD LEDs. These come pre-wired on a 5m roll, which can be separated every 3 LEDs. I got the lot, plus a NZ power supply, for $75 NZ.

Anyone used these before? :slfg:

nice, i use these, but also some strips i made myself(couldn't get correct light frequencies with pre-made ones).

Im guessing its the wide angle, 100-120 degree or something like that. Im currently using 135 degree on the coloured lights and 120 on whites.

For good growth you want the "Cool White" colour ones, these give the 6000+ K. the warm white are half that, and IMHO not a very nice colour light.

I also use a blue strip and orange/red strip to encourage growth and flowering as with other plants, mainly orchids and vege's, and it shows similar(slightly lower) growth results which i believe is due to the frequency change when going through water, although different plants grow at different rates.

There should be a thread on here with results, and my theories before i had tried them(or it may have been somewhere else lol, cant really remember).

Good thing about the ones i think u got, they're water proof, so can be exposed to the water, although I wouldn't submerge them.

I also use a PC power supply, which has multiple connections and i can control each strip individually, currently set-up with 2 x 2 strips of 100 LED's, 1 strip of 100 blue, 1 strip of 50Blue/50white(alternating) and a strip of 30 red/60 white(alternating). the white strips being premade, and the others i made myself. and you can also hook up fans to the PC power supply easily so you can run Metal hallide lights if your running marine.

  • Author
Im guessing its the wide angle, 100-120 degree or something like that. Im currently using 135 degree on the coloured lights and 120 on whites.
Yes, 120º

For good growth you want the "Cool White" colour ones, these give the 6000+ K. the warm white are half that, and IMHO not a very nice colour light.
I'm not entirely sure what the numbers are for each, and I'm not sure how to find out.

I also use a blue strip and orange/red strip to encourage growth and flowering as with other plants, mainly orchids and vege's, and it shows similar(slightly lower) growth results which i believe is due to the frequency change when going through water, although different plants grow at different rates.
Colour options: 20 Colors. 8 Light Pattern: Quick / Slow / Auto / Flash / 7 color fade change / 3 color fade change / 7 color jumpy change / 3 color jumpy change. R / G / B increase and decrease control. 8)

Good thing about the ones i think u got, they're water proof, so can be exposed to the water, although I wouldn't submerge them.
Waterproof IP68, whatever that means. I'll stick them above my tank, not in it :nilly:

I also use a PC power supply, which has multiple connections and i can control each strip individually, currently set-up with 2 x 2 strips of 100 LED's, 1 strip of 100 blue, 1 strip of 50Blue/50white(alternating) and a strip of 30 red/60 white(alternating). the white strips being premade, and the others i made myself. and you can also hook up fans to the PC power supply easily so you can run Metal hallide lights if your running marine.
Sounds good, but I had enough trouble trying to find a 12v power supply with 6A for under $50.
Hi Guys,

I have just ordered 300 of the 5050 SMD LEDs. These come pre-wired on a 5m roll, which can be separated every 3 LEDs. I got the lot, plus a NZ power supply, for $75 NZ.

Anyone used these before? :slfg:

$75 seems quite expensive the strips should only be like NZ$30-35 + $10-15 or the power supply

  • Author

Check again Zayne, these are the 5050 SMDs, not the 1210 or 3528s. It's a 300 LED Strip, 5.0m long. These are on trademe for about $120

As for the power supply, I need 12V 6A. Try finding one for $15.

i have found them for 25US

EDIT: 5M Waterproof RGB 5050 SMD LED flexible Strip 300 leds+ 24key IR Remote Controller+ 6A Power Adapter US$40

  • Author
i have found them for 25US

EDIT: 5M Waterproof RGB 5050 SMD LED flexible Strip 300 leds+ 24key IR Remote Controller+ 6A Power Adapter US$40

US$40 = NZ$50.50 + Freight? Edit: +Currency conversion charges?

So much battling lately.... Can't really change much now it's been ordered.

Looking forward to seeing photos and maybe a link to where you bought them from.

not trying to battle, just seems expensive. funny thing is the NON-waterproof ones are more expensive than the water-proof ones.

  • Author
US$40 = 48.84 NZD (1 USD = 1.22100 NZD)

its inc ship

Alright, not bad.

I'm using the ASB Conversion gadget, 1USD = 1.26240NZD.

My one has an NZ plug on it...

Regardless, it looks like you found a better deal. What site is it?

Hey Crunch, sorry about the batts... I'm stubborn.

Alright, not bad.

I'm using the ASB Conversion gadget, 1USD = 1.26240NZD.

My one has an NZ plug on it...

Regardless, it looks like you found a better deal. What site is it?

Hey Crunch, sorry about the batts... I'm stubborn.

the best currency converter i find is the one on paypal (if you are paying that way) always has been right for me, the $40 deal has a AU plug which is the same, when shopping for things ask for AU plug as i have found they seem to charge a little bit more for NZ plug when its the same as an AU plug.

  • Author
the best currency converter i find is the one on paypal (if you are paying that way) always has been right for me, the $40 deal has a AU plug which is the same, when shopping for things ask for AU plug as i have found they seem to charge a little bit more for NZ plug when its the same as an AU plug.

Good hints, cheers

  • 4 weeks later...
  • Author

They don't seem as bright as the T8s. However, it is a much cleaner light. Has a blue tinge to it, even though it is on the white setting. The blue setting is a very dark blue.

wonder if they do wavelength specific underwater LED's, i'm after a 670nM submersible setup, brighter the better. for a fish attracting device

blue tinge could be due to impurities in the resin they are made out of, my dad recently got one with a sandfly embedded in one

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.