Skip to content
View in the app

A better way to browse. Learn more.

Aquarium World

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
We’ve recently updated Aquarium World! We’re working through a few bugs, with exciting new features on the way. Thanks for your patience while we fine-tune the site.

How safe would this tank be?

Featured Replies

Hi

I plan on making a custom tank. The dimensions will be

40cmx30cmx25cm (LxWxH) in 5mm glass. I plan to have two braces at the top on each end 30cmx5cm. Would this tank be safe? And I just realized I have done this wrong.

I ordered pieces

1@ 30x40

2@ 40x25

2@ 30x25

2@ 30x5

As I have been reading up on tanks the walls of the tank should be sitting on the base, so may have to change my order to

1@ 30x40

2@ 40x25

2@ 29x25(this is to compensate for the thickness if the glass?)

2@ 30x25

I understand you start with the base, then stick the front panel on, then sides, then back, then top braces. Using aquarium silicone. And using a heavy object to hold the glass vertical and masking tape to hold it all together?

Any advice on tank making is appreciated :hail::hail:

Thanks in advance

Matt

I assume the last two pieces are 30cm x 25mm and I would not worry about them---they realy don't do much structurally on a tank that size--may help to locate the lid. Don't forget to allow for access for heater wire, airhose and filter pipes and wires.

Place back, then ends, then front, then add fillet

  • Author

Does $98 sound like a lot for that glass?

Does $98 sound like a lot for that glass?

Yes it is more than a new tank.. However if you have gone direct to a glassier it is probably reflective of what it actually costs.

  • Author

I went to a place I won't name names, but they say the supply glass. I will shop around and look for a glassier. Does anyone know of a cheaper glazier in Kapiti wellington region?

Thanks :hail:

Matt

A problem is that the thicker glass like 10 or 12 mm is only used for big panels so it is possible to get larger pieces as offcuts. The thinner glass can be used for right down to very small sizes like louvres in a toilet window so they charge retail for everything. People who make tanks get a better deal because they take everything. It may be cheaper and better to pay a tank maker to make it.

  • Author

Yeah, I was talking to a mate and I will see how much Port Nichillson (sp?) Glass will charge. Is 5mm safe for a tank this size?

Yes as it is only 250 mm high.

talk to Port Nicholson $98 seems a lot for a small tank like that

  • Author

So it got at rating of 11. So what's safe?

So it got at rating of 11. So what's safe?

2 or 3 would be the norm, 1 being failure is imminent. My 4ft in 10mm glass has a factor of about 2.7

  • Author

Thanks :hail: have I done this wrong? I stuck in 250 for height 400 for length and 5 for width

550 for height 1200 for length and 12 for width got me a rating of 5.19 :thup:

5mm is safe as because it is only 250mm high. The taller the tank, the more pressure there is on the joint at the bottom and the longer the tank the more flex there will be at the top. This sized tank would normally be built from 4 or 5 mm glass with no bracing and would be perfectly OK.I had three tanks of a similar size from 4mm that worked very well until shakey town started.

AH, but a tank with the right sized glass and correct bracing with a safety factor of 3.8 will survive the shaky-thing - unless it falls off its stand, gets hit by something else or isn't properly glued together...

the cost of your glass is more than double what I paid Greg to make mine of similar dimensions, so yes would pay to check in with a tank maker

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.