September 17, 200719 yr comment_183621 Well, the base has a crack in it, which means that it is loosing pressure, and not skimming properly - Hence, rubbish . I figure it should be fine to drill the venturi out & block it up with silicone. Anything i should know when trying this? How much flow should I be trying to shove through it? Report
September 17, 200719 yr comment_183623 Why not just fix it? Just rough the plastic up a bit with sand paper and smear on some epoxy. Report
September 18, 200719 yr comment_183649 With Ira that it could be repaired, however the phosphate reactor idea would also work well. You would probably place a circular sponge or similar above the venturi to make the water flow up through the media evenly and not have a dead spot. Report
September 18, 200719 yr comment_183675 don't drill the venturi if its the red sea. the venturi just screws out. Report
September 18, 200719 yr Author comment_183677 The ventui is glued in, the crack goes from the bottom of that, right through along to the base. hence why fixing it ain't an option lol Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.