Skip to content
View in the app

A better way to browse. Learn more.

Aquarium World

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Setting up new tank

Featured Replies

Ok, so I've got all the gear now and today started setting up the new tankl

Its 24 by 12 by 12 and running undergravel filter plus external filter.

Ive filled it and set the filter going and bought a start up kit that includeds PH stabilizer, salt, ammo lock, stress zyme and stress coat. Ive added per the instructions and now I guess its a matter of waiting.

When can i introduce plants & fish?

I've heard that plants can go in straight away, is this correct?

And fish? After a week i can add a few? like 5 or 6 small fish?

Any tips would be appreciated

Put the new fish and plants in right away, say after 3-4 hours once everything's up to temp and the water is cleared anyway. The tank won't start cycling without fish.

You don't need ammo lock, salt (unless it is a marine or you are wanting brackish fish), Stresscoat or Stresszyme. You also shouldn't need pH stabiliser. What is the pH of your tap water?

Plant the plants straight away and add 4 small fish. These fish will help cycle the tank.

After one month, check readings of pH, ammonia and nitrates. If all levels are acceptable, you can add 4 more fish.

Ok, so I've got all the gear now and today started setting up the new tankl
Sorry... But I disagree with the above "if you just got your tank today"

By all means put the plants in if you must, but personally I would leave the tank for at least three days setup and running "before" adding any fish.

This will allow you to check temperatures, plus other readings, and allow the tank to clear properly before you add the four small fish.

JMO :)

As above, the tank won't normally start the cycle without fish, but avoid adding additives if possible... they are easy to put in, but a pain to get rid of. :)

  • Author

Ok well ive actually had the tank for about 10 years and tested it for cracks the other day as has not been in use for some time.

Yesterday I just went and got some tubing for the pump lol, was the last stuff i needed.

So far everything has checked out fine. The waters very clear for day 2 in comparison to my older setups.

I was intending on putting some plants in tomorrow maybe and a few fish next week.

From what I was told the stress zyme will help the biological cycle get underway? Ive been told this by a number of shops (i know they are probably after my $$ but $$ no real issue). Will this just help more when I get those first few fish in there?

I was under the impression that a small amout of salt was recommended to be added with new water? Hmmm

As for those 1st few fish what would you recommend?

Stress zyme doesn't help that way at all.

It needs live whatevers to do the work.

You are correct, and they got your dollars.

To do it properly without fish, (fishless cycling),

you use ammonia into the water, and daily checking with test-kit,

that can cost a bit.

I think if you put what I have in ()'s on the search,

you'll find out how to do it

Shove in half a dozen neons, they are bright, flashy, and cheap,

a good displaying fish,and can be added to, if necessary.

Alan

  • Author

Cool will get a few small fish in there fairly soon, prob day after boxing day

thanks

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.