Tank Dividers

[kylejmorrison]

Has anyone set a divider up from what ive read all you need it plastic canvas and suction caps anyone know what these cost and where in chch you can get them. Opinons on divders would be apprciated to please!

Thanks

[Caryl]

Make your own using stiff plastic stuff with holes in it that tapestry people use or make a simple frame and attach fine mesh to it.

[Alan]

I use glass dividers and clips that I designed that clip over the top of the back, the front, and the divider.

So that's two clips.

Also, to baby proof the divider I use airline split lengthwise on the front and back edges of the divider, and if there is no gravel in the tank, along the bottom as well.

Alan 104

[fishboi]

i use to make my own out of fine mesh plastic tralice [spelling] u buy off the roll in garden centres, just heat it and it sets hard but they're really not that expensive now.

http://www.trademe.co.nz/Home-living/Pe ... 113020.htm

i use this its very easy to cut down to size.

[evil_elmo]

i just use a piece of poly, cut to size, then make holes for the water flow

[Fishman]

I used old washing basket, filing tray and even dish rack secured with suction cups for my big fish.

[alanmin4304]

I have just built a 1200x500x400 tank devided into 6 sections and heated from under the tank. I is working OK at present, will let you know how it goes with fish in.