dhindry Posted April 14, 2005 Report Share Posted April 14, 2005 Well I didn't think it would happen but it has. The main display tank approx 300 litres sprung a leak last night. Leaking from where the overflow goes through the bottom of the tank. Todays mission is to try and get the carpet dry Thank goodness for wet and dry vaccuum cleaners Quote Link to comment Share on other sites More sharing options...
suphew Posted April 14, 2005 Report Share Posted April 14, 2005 Bugga! Let me or Pies know if you need to store some live stock etc while you do repaires. Quote Link to comment Share on other sites More sharing options...
dhindry Posted April 14, 2005 Author Report Share Posted April 14, 2005 Thanks for the offer. Last week I set up my 200 litre tank in the garage running off the same system. So all the rock, corals and inhabitants have moved home Quote Link to comment Share on other sites More sharing options...
dhindry Posted April 15, 2005 Author Report Share Posted April 15, 2005 Carpet is now dry. Tank back in place, with tons of silicon in place to stop it leaking again. Now will have to wait and see when filled with water what it decides to do. Quote Link to comment Share on other sites More sharing options...
Shelley Posted April 15, 2005 Report Share Posted April 15, 2005 Wow! That was quick! Glad you have it all back together now...one of the tanks i bought has a very slow leak and i am waiting for my next trip to chch to buy some proper sealing silicone stuff....is it wasy to do? and how long does it take to dry properly before you can refill it? The leak was very slow...probably only went down by a mm a day....so it will take me a few days once it is refiulled to see if i have fixed it or not. Any tips on how to do a good job gratefully received Quote Link to comment Share on other sites More sharing options...
Shelley Posted April 15, 2005 Report Share Posted April 15, 2005 lol!!!!! wasy? of course i meant....EASY. doh! :oops: Quote Link to comment Share on other sites More sharing options...
dhindry Posted April 16, 2005 Author Report Share Posted April 16, 2005 A couple of tips. 1) Make sure that the silicon is for Aquarium use. 2) Make sure the place to be fixed is clean and dry before applying. I left mine to dry for about 15 or so hours. Some silicons set faster than others. Daniel Quote Link to comment Share on other sites More sharing options...
Duke Posted April 16, 2005 Report Share Posted April 16, 2005 I know the feeling... my fresh tank leaked in the lounge, 300l what a mess. This was the start of my salt tank, hard sell to the wife. She likes the new tank better than the oscars / fighting. Poor fish hope they are enjoying fish after life. never again........... Quote Link to comment Share on other sites More sharing options...
suphew Posted April 17, 2005 Report Share Posted April 17, 2005 Shelly, my local super market sells silicon maybe thats easier for you than waiting for a trip into the big smoke. They good stuff usually has for aquaium use written it on. when you do the repair use a sharp blade to remove the old silicon but dont remove it from inside the joint (between the glass) do a far wider piece than the actual leak, the whole corner if you can. A strip of masking tape 10mm from each corner makes cleaning up easier. make sure it is really really really clean. If you can use isopropal otherwise meths to clean. Apply the silicon, use a soapy finger to push it into the corner, remove the masking tape before the silicon drys and leave it over night to cure. I always take the tank outside and fill it with the hose to test it and clean out any bits old silicon, dust etc. Anything I have forgotten anyone?? Quote Link to comment Share on other sites More sharing options...
angelfish Posted April 17, 2005 Report Share Posted April 17, 2005 does a soapy finger alow you to touch the silicon without it sticking to you? wish i new that 2 months ago!! Quote Link to comment Share on other sites More sharing options...
suphew Posted April 17, 2005 Report Share Posted April 17, 2005 Not 100% but works pretty good. Better than just a wet finger. Quote Link to comment Share on other sites More sharing options...
SteveA Posted April 18, 2005 Report Share Posted April 18, 2005 ..... The main display tank approx 300 litres sprung a leak last night. Leaking from where the overflow goes through the bottom of the tank. ... While I sympathise with your plight, having had a 1600L start to split a bottom seam in the past myself, your experience certainly reinforces the stance I took when Pies and others were trying to convince me of the wisdom of drilling holes in the bottom of my new tank to put circulation pumps in. Some basic plumbing lessons sink in slowly, sometimes requiring wet feet before the dubious nature of the pressure as depth/PVC pipe/silicone sealer/glass interface is fully appreciated. Steve Quote Link to comment Share on other sites More sharing options...
chimera Posted April 18, 2005 Report Share Posted April 18, 2005 hence why i used 2 tubes of silicon on my tank and 5 rolls of teflon tape :lol: Quote Link to comment Share on other sites More sharing options...
SteveA Posted April 18, 2005 Report Share Posted April 18, 2005 In my case, the end result of the planning cycle was a sum total of 2 x 50mm holes, the lowest of which is centred 20.5mm below the top. Even then, they are surrounded by a glass cofferdam/overflow that only goes a few cm deeper itself. Call me paranoid if you like.... but I figure over the last 10-12 years of reefing I have spent enough time mopping up carpets. Steve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.