Jump to content

another one for the PC peeps


Sophia

Recommended Posts

I know google is my friend, but you guys are (usually) friendlier....... :hail:

if I want to watch youtube/internet on my LED TV, is it simply a matter of unplugging the monitor from the PC and using that same cable to plug into the VGA slot on the side of the TV? The TV is obviously digital, and it does have a 'PC' option in the menu.

Link to comment
Share on other sites

Does your tv have an ethernet port on it? How old is it? Most decent branded tvs from the last couple of years should have an internet browser built in all you have to do is plug it into your router. But yes you can just plug the vga cable from your monitor into your tv, just close your pc down first then plug it into the tv and start it back up. Your pc might even have a video card that has other types of connections on it (HDMI,VGA,DVI) so you can run your monitor and the TV.

Link to comment
Share on other sites

it has ports for USB, 2 HDMI slots, a PC audio input (apparently I have to plug something in there but there isn't anything that the PC uses of that nature at present) and the VGA port.

There doesn't seem to be a setting on the video card that gives the option of tv or pc etc. I was just looking in the video card tab in the control panel, it's properties etc.

TV itself was bought new a week ago but I think it's a couple of years old a model

Link to comment
Share on other sites

Sony?

It might be able to hook up to a wireless network with a wi-fi dongle (always sold separately)

But like I said you can do it the way you mentioned before with no problems. You might have to play around with the resolution to get it to look nice when its plugged into the tv. What operating system are you running?

Link to comment
Share on other sites

Yeah, audio doesn't come out through VGA, its just a standard 3.5mm - 3.5mm audio cable available from any pc shop, even the warehouse might have them. Sorry to say I don't think Veon support internet or wi-fi so the dongle is probably out of the question. Only way is to use it the way you have said above.

Link to comment
Share on other sites

a PC audio input (apparently I have to plug something in there but there isn't anything that the PC uses of that nature at present)
This is where you use a audio cable to connect your computer's sound card to your TV's speakers.

3.5mm-jack-lead-male-to-male-stereo.jpg

There doesn't seem to be a setting on the video card that gives the option of tv or pc etc. I was just looking in the video card tab in the control panel, it's properties etc.
It turns up after you plug in your TV. It uses your TV as another monitor.

TV itself was bought new a week ago but I think it's a couple of years old a model

It's new enough if it has HDMI. Does your computer have an HDMI output?

Link to comment
Share on other sites

that's another idea CrunchBang. I didn't think of that.

This is the Nvidia device name: NVIDIA GeForce 6150SE nForce 430

Driver date 27/09/09

Driver version 8.16.11.9107

Does any of this below mean good things for using a VGA to HDMI cable? The back of the PC only has USB, VGA and keyboard type ports so I know I can't use an HDMI to HDMI one.

and from its control panel:

[Display]

Processor: AMD Athlon 7550 Dual-Core Processor (2512 MHz)

Operating System: Windows 7 Ultimate, 32-bit (Service Pack 1)

DirectX version: 11.0

GPU processor: GeForce 6150SE nForce 430

Driver version: 191.07

Core clock: 425 MHz

Memory clock: 100 MHz (200 MHz data rate)

Memory interface: 32-bit

Total available graphics memory: 831 MB

Dedicated video memory: 128 MB

System video memory: 0 MB

Shared system memory: 703 MB

Video BIOS version: 5.61.32.25.02

IRQ: 22

Bus: FPCI

[Components]

nvCplUIR.dll 2.2.405.00 NVIDIA Control Panel

nvCpl.cpl 2.7.170.15 NVIDIA Control Panel Applet

nvCplUI.exe 2.7.170.15 NVIDIA Control Panel

nvWSS.dll 8.16.11.9107 NVIDIA Workstation Server

nvViTvS.dll 8.16.11.9107 NVIDIA Video and TV Server

NVMCTRAY.DLL 8.16.11.9107 NVIDIA Media Center Library

nvDispS.dll 8.16.11.9107 NVIDIA Display Server

NVCPL.DLL 8.16.11.9107 NVIDIA Compatible Windows7 Display driver, Version 191.07

NVCUDA.DLL 8.16.11.9107 NVIDIA CUDA 2.3 driver

nvGameS.dll 8.16.11.9107 NVIDIA 3D Settings Server

[Display]

Processor: AMD Athlon 7550 Dual-Core Processor (2512 MHz)

Operating System: Windows 7 Ultimate, 32-bit (Service Pack 1)

DirectX version: 11.0

GPU processor: GeForce 6150SE nForce 430

Driver version: 191.07

Core clock: 425 MHz

Memory clock: 100 MHz (200 MHz data rate)

Memory interface: 32-bit

Total available graphics memory: 831 MB

Dedicated video memory: 128 MB

System video memory: 0 MB

Shared system memory: 703 MB

Video BIOS version: 5.61.32.25.02

IRQ: 22

Bus: FPCI

[Components]

nvCplUIR.dll 2.2.405.00 NVIDIA Control Panel

nvCpl.cpl 2.7.170.15 NVIDIA Control Panel Applet

nvCplUI.exe 2.7.170.15 NVIDIA Control Panel

nvWSS.dll 8.16.11.9107 NVIDIA Workstation Server

nvViTvS.dll 8.16.11.9107 NVIDIA Video and TV Server

NVMCTRAY.DLL 8.16.11.9107 NVIDIA Media Center Library

nvDispS.dll 8.16.11.9107 NVIDIA Display Server

NVCPL.DLL 8.16.11.9107 NVIDIA Compatible Windows7 Display driver, Version 191.07

NVCUDA.DLL 8.16.11.9107 NVIDIA CUDA 2.3 driver

nvGameS.dll 8.16.11.9107 NVIDIA 3D Settings Server

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...