Jump to content

Don't turn the lights off at the wall??


Jennifer

Recommended Posts

Ok, so I was teaching a course on parasitology last month and I had a guy come in to talk about microscope care. He said that you should never turn the microscope (light) off at the wall, since the bulb life will be reduced (from power surges?). This made me think about my tank lights. If I turn them off at the wall, is that going to reduce their lifespan? Similarly, if I have them on a timer, this is essentially turning them on and off at the wall, right? So what's the deal here? Should I avoid turning my lights off at the wall?

Link to comment
Share on other sites

Unless you have some special switch it doesn't make any differnence where you turn them off. I suspect that the microscope had a fan or something that cooled the light, turning it off at the wall would also turn off the fan letting the bulb overheat. Projectors have a similar system.

Link to comment
Share on other sites

Possibly a difference in back emf due to the different wiring distances...But that would just be so stupidly small. Most likely a fan, like suphew says. That's assuming his concerns are actually valid and not a case of "Someone sometime told me with some unrelated equipment that I shouldn't turn it off at the wall."

Link to comment
Share on other sites

Thanks guys. I am pretty certain these microscopes have no fan so who knows what that guy was on about. At any rate, it is good to know that it makes little difference whether turning it off at the wall or at the switch.

sometimes certain personalities will grab snipits of info & store it for use when trying to bolster the appearance of knowledge on something. we have an IT guy at work that is full of useless info like that that helps no one but fills in the day & manages to keep him from doing anything that remotely looks like the task at hand. Its really kinda odd, replies to any question are a complete over view of everything & anything remotely like the question you asked but none of it actually helps sort the issue.

Link to comment
Share on other sites

If you pull the plug out of the wall without turning it off then the period where there is a poor connection, and a power surge will occur as the electricity bridges the gap. this can be harmful to electrical equipment. that is why switches click when you switch them - they are spring loaded so they are either on or off and the time they spend either connecting or disconnecting (and therefore the time with a poor connection) to the current is minimised - it is fine to switch things on and off but try to avoid pulling the plug out

Link to comment
Share on other sites

If you pull the plug out of the wall without turning it off then the period where there is a poor connection, and a power surge will occur as the electricity bridges the gap. this can be harmful to electrical equipment. that is why switches click when you switch them - they are spring loaded so they are either on or off and the time they spend either connecting or disconnecting (and therefore the time with a poor connection) to the current is minimised - it is fine to switch things on and off but try to avoid pulling the plug out

This is correct

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...