Jump to content

having power disconnected


rundberg26

Recommended Posts

Three hours probably isn't long enough to have to worry about the oxygen level dropping or the filter media drying out of you have a trickle filter set up with media above the water.

Some fish are much hardier than others when it comes to temperature change (and other things associated with a power outage) so to answer your question accurately/safely you should tell us what kind of fish you're keeping and more about the set up.

Link to comment
Share on other sites

have been doing it for two years and never had any deaths but only a lightly stocked community tank.

That's because you're killing all the bacteria in the filter every night so it's built up more elsewhere. That way you don't lose any. Essentially you're making it just a mechanical filter.

Link to comment
Share on other sites

hi there can anyone give me input as having our power dissconnected for 3hrs to have work done on the house

i have 2 3ft tanks would the fish be o.k or would i need to apply hot water?

This depends on several things including the type of fish, the ambient temperature of the room, etc.

The 'safe' answer would be to throw towels or blankets over the tanks to keep them insulated until the power comes back on.

Warning! Do not put towels/blankets on top of your lights in case the power comes on earlier than expected!

If the power is off for longer than expected (5+ hours) you should probably have a 'plan B' ready. Have a thermometer in each tank so you can keep an eye on the temp. Do you have another way of warming water to top up the tanks? (eg gas or wood fire) This could be important, especially if it's a cold day, an uninsulated house, or the tanks are near windows or outside walls.

Link to comment
Share on other sites

Water cools fifty times faster than air.

Sure, if it's used as a coolant it will cool the object quicker. But that's about as relevant as how many times you can skip a rock on water in this case.

More important in this case would be the specific heat, which is basically a measure of how much energy it takes to increase the temperature of the medium a given amount. Water is FAR higher than air. Obviously it's going to take more energy to heat(Or cool) 100KG of water in a 100L tank vs approx 100 grams of air.

(Obviously, thermal conductivity matters too but it's not enough to change the results much)

Link to comment
Share on other sites

Sure, if it's used as a coolant it will cool the object quicker. But that's about as relevant as how many times you can skip a rock on water in this case.

More important in this case would be the specific heat, which is basically a measure of how much energy it takes to increase the temperature of the medium a given amount. Water is FAR higher than air. Obviously it's going to take more energy to heat(Or cool) 100KG of water in a 100L tank vs approx 100 grams of air.

(Obviously, thermal conductivity matters too but it's not enough to change the results much)

Do you ever grow tired of proving people wrong?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...