HaNs Posted July 6, 2007 Report Share Posted July 6, 2007 PMDD Info for dosing rates is availalbe here: http://www.csd.net/~cgadd/aqua/art_plan ... e_calc.htm Quote Link to comment Share on other sites More sharing options...
HaNs Posted July 6, 2007 Author Report Share Posted July 6, 2007 The below is from http://www.thekrib.com/Plants/Fertilizer/pmdd-tim.html But, to get started, for each ten gallons, try around 1/12 ml of PMDD a day (roughly 2 drops). A 29 gallon tank would then get 1/4 ml a day (roughly 6 drops). If you don't do many partial water changes, dose less. If you have a "high tech", densely planted, CO2 injected, VHO lit tank, you might want to double the dose to 1/6 ml of PMDD per 10 gallons a day (roughly 4 drops). Just make sure you keep an eye on the Nitrate levels when using PMDD. Personally i try and keep it around 5ppm Nitrate. If over dosing this can lead to algae growth and other implications Quote Link to comment Share on other sites More sharing options...
HummingBird Posted July 6, 2007 Report Share Posted July 6, 2007 Also make sure you store it in the fridge to prevent fungus, unless you're adding the Hcl Hans? Quote Link to comment Share on other sites More sharing options...
HaNs Posted July 6, 2007 Author Report Share Posted July 6, 2007 Also make sure you store it in the fridge to prevent fungus, unless you're adding the Hcl Hans? No HCL. People can add it once they get the mix. I have never had a problem with fungus. I do treat my jars in boiling water before putting the mix in. Quote Link to comment Share on other sites More sharing options...
jayci Posted July 6, 2007 Report Share Posted July 6, 2007 When using PPMD, does it mean I don't need to used another fert. ie fert balls or daltons aquatic mix? Quote Link to comment Share on other sites More sharing options...
HaNs Posted July 6, 2007 Author Report Share Posted July 6, 2007 When using PPMD, does it mean I don't need to used another fert. ie fert balls or daltons aquatic mix? I use daltons mix and have never used other ferts when using PMDD (i do have a bottle of fert sitting here that cost me $40) Quote Link to comment Share on other sites More sharing options...
jayci Posted July 6, 2007 Report Share Posted July 6, 2007 So Daltons mix plus PPMD = very good. Do the trace elements have iron in it? I understand that plants need iron but to much is not good for fishes. Quote Link to comment Share on other sites More sharing options...
HaNs Posted July 7, 2007 Author Report Share Posted July 7, 2007 So Daltons mix plus PPMD = very good. In my case it seams to be Do the trace elements have iron in it? I understand that plants need iron but to much is not good for fishes. It does have small amounts. All my tanks are fine using this product Quote Link to comment Share on other sites More sharing options...
HaNs Posted August 14, 2007 Author Report Share Posted August 14, 2007 Have a small amount left. Get in quick or be left out Quote Link to comment Share on other sites More sharing options...
Luke* Posted August 14, 2007 Report Share Posted August 14, 2007 Yup Jayci iron is the most important element that plants require after light and CO2. Quote Link to comment Share on other sites More sharing options...
HummingBird Posted August 14, 2007 Report Share Posted August 14, 2007 I'd disagree with that, Nitrate is more important than Iron I'd say. Quote Link to comment Share on other sites More sharing options...
HaNs Posted August 14, 2007 Author Report Share Posted August 14, 2007 Yup Jayci iron is the most important element that plants require after light and CO2. My plants grow like weeds with halides and pmdd. Wish i could have a good co2 system Quote Link to comment Share on other sites More sharing options...
purplecatfish Posted August 14, 2007 Report Share Posted August 14, 2007 iron is the most important element that plants require after light and CO2 Nitrate is more important than Iron I'd say If you exclude Carbon, Hydrogen and Oxygen (CO2 and H2) then plants consist of approx 30,000 ppm Nitrogen; 20,000 ppm Potassium and 150 ppm Iron. But iron is the critical component of chlorophyll and thus photosynthesis. Nitrogen from ammonia, nitrite or nitrate is esential for protein production and leaf growth. Quote Link to comment Share on other sites More sharing options...
HummingBird Posted August 14, 2007 Report Share Posted August 14, 2007 Yes exactly. I didn't mention that nitrate can be gotten from ammonia or nitrate because those really shouldn't be in a planted tank anyways I said that nitrogen is more important than iron, but that's just because more of it is used. Really, nitrogen, iron, carbon, potassium and a few other elements are all "essential" in that they play a critical part in plant functioning at some point or another. What luke said isn't true obviously, but what he probably meant was iron is one of the most important to supplement, which is true. Usually enough nitrogen is produced for most people to not have to worry about supplementation. Quote Link to comment Share on other sites More sharing options...
steve sisson Posted August 17, 2007 Report Share Posted August 17, 2007 so where do you buy ppmd and what does it stand for also daltons mix where can you buy it from cheers Quote Link to comment Share on other sites More sharing options...
alanmin4304 Posted August 17, 2007 Report Share Posted August 17, 2007 Nitrates are produced from the urea from fish (urea-ammonia-nitrite-nitrate) and utilised in the amino acids in the proteins. They are also released when the leaves die and rot, or removed with water changes. A few fish and a lot of plant is the natural balance. Quote Link to comment Share on other sites More sharing options...
Warren Posted August 17, 2007 Report Share Posted August 17, 2007 Plants actually use ammonium better than nitrate. They may have a high percentage of Nitrogen in their structure but ammonium is much easier for them to assimilate than nitrate. Ammonium should be readily available in the planted tank as the pH should be below 7. Nitrate is not more important than iron or any other nutrient for that matter. The correct balance between all nutrients (including CO2) and light is required for optimal growth and PMDD with macro-nutrients comes very close to the correct balance. To say nitrate is more important than iron does not mean anything as without iron, the nitrate (or nitrogen containing compound) is useless... Quote Link to comment Share on other sites More sharing options...
HummingBird Posted August 17, 2007 Report Share Posted August 17, 2007 Yeah, that's exactly what I was saying warren, thanks. Quote Link to comment Share on other sites More sharing options...
alanmin4304 Posted August 17, 2007 Report Share Posted August 17, 2007 Only guessing, but I would have thought ammonia would react with water to form ammonium hydroxide and that would put the pH up. Quote Link to comment Share on other sites More sharing options...
Warren Posted August 18, 2007 Report Share Posted August 18, 2007 Maybe, but not at the concentration of less than 1.0ppm in a well established aquarium... Quote Link to comment Share on other sites More sharing options...
alanmin4304 Posted August 18, 2007 Report Share Posted August 18, 2007 I agree that all the constituents need to be present for good plant growth so you will not be successful by just adding CO2 or powerfull lighting without all the other requirements. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.