AW

Out of interest, why isn't a wet/dry on a FO tank a good idea?

Got a group of 6

Thanks for that, have now got some 8)

Always been a fan of Congo Tetras.

Thanks, off to the vets then 8)

What exactly is Metro? Metronidazole? Where do you source it from. Had huge problem last year with what I believ was bloak with my Tangs and lost a few so be keen to know. Regards Andrew

That's works for me :oops: Should've of worked that out for myself. Just popped down and looks like they're all gone

Fantastic :bounce: Only problem I've never heard of Animares and they're not list in the phone book, Can anybody give me directions. Regarsd Andrew

Can I ask where you got your cuckoo synos from, been looking for a while myself. And by Cuckoo I assume their Multipunctatus (sp?) Regards Andrew

Probable a lot quicker and cheaper to DIY a repair job. Regards Andrew

Have put a couple of links in your other thread. Also see the thread http://www.fnzas.org.nz/fishroom/overfl ... 26930.html This is what the Tunze unit is. Yes, the basic principal is 2 water supplies, one with it water level higher than the other. The water supply with the lower water level (read sump) has its water pumped up to the higher water level supply (read aquarium). The upper supply has a weir set at the water level, as water is pumped into the aquarium, water simply spills over the weir which is then piped back down to the sump, and around it goes. In your case, you have the Tunze overflow acting as a weir. Hope that makes sense.

The sump is set up as a Marine Refuge. As the main photo show, water will ne br dumped into the left chamber, possible with a prefilter. THe mid section would be set up with a sand base and used to culture Macro algae ( the gut would have run a light over it) the right side the first glass panel set the height of water in the refuge. The last chamber on the right would be where the return pump sat. The water level will only change in this chamber as water evaporates for the system, being a small chamber and the amont of evaporation you get from a reef tank, henced the need for the top up float in the chamber to maintain water level for the pump and maintain a constant salinity. Probable used an external pump also, hence the bulkhead fitting. http://www.marinedepot.com/ps_AquariumP ... p_kit.html So what does this all mean to you! Its not very useful for freashwater in its current configuration Ideally you want a trickle filter or wet/dry set up http://newaquariuminformation.com/aquar ... filter.htm Search trade me for "Wet & Dry Trickle Filter" It may suit your purposes quite well. Oh, and if nobody has told you, sump type systms make noise 8) Making them quite is another whole dicussion

Power head on the right is a Maxi Jet by Aquarium systems. Actually quite a good power head. Also looks like an Eden power head in the middle with moving nozel for wave making, not so crash hot as the mechanism clogs up (well dod for me) Pump in the left looks like a Rio, has a reputation for blowing up. The overflow looks to be a Tunze box. http://www.tunze.com/149.html?&L=1&C=AU ... zeprod_pi1[predid]=-infoxunter005 Looks to me as you do need a bid return pump, the power heads probably are not grunty enough although the RIO maybe. Actually, looking at the pipe work the original owner may had both the RIO and Maxi-Jet as return pumps. Hard to know without knowing the flows rates and head pressure. Personally I like the Eheim 1060 (think their now called 1260) pump for return, super reliable and easy to get a 2nd hand one off a marine guy. If your wanting to clean the gear off, soak it in a solution of water and white vinegar over night. Will clean it off like new. The plumbing Fittings (black ones) are Hassens and widely used for plumbing on fish tanks here http://www.hansenproducts.co.nz/ Hard to comment on the sump with put seeing the whole item and how itsd baffled. Marine sumps do tend to be a bit more customised the a freshwater sump. There's a sump set up on TradeMe at the moment that maybe more suitable (No, it's not me but worth a look at) Oh yeah, I'm on holday with a ton of time to kill :bounce:

Check out the commercials: Royal Panque $84.20 Origin Aquatics 17A Bute Road Browns Bay Auckland Was in there last week and they still had it. Also have a Dull eyed Royal Pleco, L191 Both were around 3inchs but don't hold me too it. Regards Andrew

Some good information here http://www.bollmoraakvarieklubb.org/art ... 0loach.htm 2/3rd's down talks about this problem.