heater error.. help please??

[Jaxxnz]

Hi Guy, could any 1 help me out on this please..

yestoday i was moving tank, the heater in my fry tank when error bost temp up to 32c continuous..

half of my baby jags are gasping at the bottom floor now, i had turn off the heater and add some cold water in already

what else could i do to control the stress?

[smidey]

not much more you can do i don't think, as long as the temp is somewhere near what it should be they should be ok.

[Jaxxnz]

not much more you can do i don't think, as long as the temp is somewhere near what it should be they should be ok.

would stress coat do any good?

[livingart]

the hotter the water the less oxygen it holds

so water movement on the surface will help

stress coat will help

don't lower water temp too quickly as that will add more stress

[Jaxxnz]

the hotter the water the less oxygen it holds

so water movement on the surface will help

stress coat will help

don't lower water temp too quickly as that will add more stress

i chuck in a new heater, i am currently using unnder ground filter for them at the moment, so increase the air inlet for more oxygen?

got the stress coat in as well.

Thank you Livingart"

[smidey]

i think if you opened up the taps it would be a good thing, the more oxygen the better. they should be fine IMO

[livingart]

yes they should come right