Carlos & Siran Posted September 13, 2009 Report Share Posted September 13, 2009 Hey, yeah, it's usually quite quiet and every now and again it will make that air bubble noise but after few seconds it will generally stop, but this afternoon it hasn't stopped making the airy noise. We checked to make sure water is getting in and it's still a good strong stream but the water is just dribbling out the outlet bar. we pulled it apart and put it back together but it hasn't made any difference. we've turned it off now cause we're scared of wreaking it. Does anyone know what could be causing the problem? Oh, we just recharged the CO2, we have the tube poked up the end of the intake, could that be the problem? :-? Quote Link to comment Share on other sites More sharing options...
phoenix44 Posted September 13, 2009 Report Share Posted September 13, 2009 have a look at the impellor Quote Link to comment Share on other sites More sharing options...
WEKA Posted September 13, 2009 Report Share Posted September 13, 2009 Are you saying you have the co2 up the filter intake then that is your problem Quote Link to comment Share on other sites More sharing options...
Ira Posted September 13, 2009 Report Share Posted September 13, 2009 Oh, we just recharged the CO2, we have the tube poked up the end of the intake, could that be the problem? :-? Uhhh...Yes...I agree with Weka. You're intentionally putting air into it and then wondering why it sounds like it has air in it? Some filters don't deal as well with CO2 going into the intake. Quote Link to comment Share on other sites More sharing options...
phoenix44 Posted September 13, 2009 Report Share Posted September 13, 2009 Ive done the Co2 intake with a 2215 and it was perfectly fine. having said that, if the CO2 is causing the problems, you are putting far too much CO2 into your tank. try reducing the amount of yeast you use in the mixture if the problem is indeed too much gas in the cannister. Quote Link to comment Share on other sites More sharing options...
Carlos & Siran Posted September 13, 2009 Author Report Share Posted September 13, 2009 Uhhh...Yes...I agree with Weka. You're intentionally putting air into it and then wondering why it sounds like it has air in it? Some filters don't deal as well with CO2 going into the intake. First thing we did was take to tube out, made no difference though, even after a half hour or so Quote Link to comment Share on other sites More sharing options...
phoenix44 Posted September 13, 2009 Report Share Posted September 13, 2009 have you checked to see if the impellor is sitting properly? is the ceramic shaft ok? Quote Link to comment Share on other sites More sharing options...
Carlos & Siran Posted September 13, 2009 Author Report Share Posted September 13, 2009 it seems to have settled down now but will check the impellor after tea, cheers phoenix Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.