TM Posted November 3, 2004 Report Share Posted November 3, 2004 This is a email sent to me from the Christchurch City Council On Wed 3rd November 2004. Thought it may be of interest. It shows the ave of the water quality in Christchurch Hi Tim, Water data as requested: Also, the water at your Beckenham site is likely to have a variable pH due to variable water sources, aeration times etc. but typically this will be an average of 7 - 8. Phosphate <0.05ppm Reactive silica is 16ppm At Stanmore Road the phosphate level is <0.05ppm Reactive silica is 20ppm pH is 7.8 Hope this helps, Regards, Gareth Phillips A typical average analysis of Christchurch Water pH: 7.8 pH after aeration: 8.2 g/m3 Acidity to pH 8.3 (as CO3): 1 g/m3 Total Alkalinity to pH 4.5 as HCO3: 52 g/m3 Turbidity (TU): Less than 1 Nitrate Nitrogen: 1 g/m3 Sulphate: 5.0 g/m3 Chloride: 5.0 g/m3 Calcium: 2.0 g/m3 Fluoride: Less than 0.1 g/m3 Magnesium: 1.5 g/m3 Potassium: 1.0 g/m3 Sodium: 6.1 g/m3 Reactive Silica (as SO2): 16.0 g/m3 Total Hardness (as CaCO3): 45 g/m3 Conductivity at 20ûC (ms/m): 10 Quote Link to comment Share on other sites More sharing options...
Fishy_matt Posted November 3, 2004 Report Share Posted November 3, 2004 so are these parameters good enough to put into your tank straight out of the tank? Was just wondering if many ppl in chch use tap water on their tank??? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.