RnB Posted October 5, 2004 Report Share Posted October 5, 2004 i have a glass tank that i want to use as a frag area tank, its drilled low in one corner about 1 inch off the bottom, has a nice through fitting with a thread on the outside and a simple hole on the inside. I want to use a 90degree bend on the inside and different height pvc pipes at different times, so they must be changeable . how can i get a good seal on the inside of the tank? is there a throuigh type fitting with a thread on each end? Quote Link to comment Share on other sites More sharing options...
Pies Posted October 5, 2004 Report Share Posted October 5, 2004 Hansen tank inlets are what you are after. Its what most of us use, less than $10ea. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.