ChrisMack Posted June 19, 2004 Report Share Posted June 19, 2004 Interesting post this one, I'm currently also working on a new tank, and have an external filter to intall as well.....now that there are several ideas for the spraybar/water outlet......i would like to know peoples opinions on the uplift tube...... What depth does the uplift tube have to be placed at in the tank? heres why I'm asking......I'm hoping that the tank I'm setting up will look as natural as possible, with not too much visible "parts" visible inside the tank. (the main problem will be the heater!) So to 'hide' the uplift tube I have a piece of bogwood to place in front of it(this wont effect the flow), however to have it hidden better the end of the uplift tube will be just below the half way of the tank.....will this be sufficient, or are they better off positioned as low as possible in the tank? Thanks for any suggestions, ChrisMack Quote Link to comment Share on other sites More sharing options...
Ira Posted June 19, 2004 Report Share Posted June 19, 2004 Assuming you have just the standard airstone running the uplift, then you want it as tall as possible, up to the surface of the water if possible. With a powerhead...Tall enough to connect the powerhead is fine. Quote Link to comment Share on other sites More sharing options...
henry Posted June 19, 2004 Report Share Posted June 19, 2004 most authorities i've read have mentioned 5cm above substrate as optimum position for internal or external filter intake... i guess it depends on other fixtures in the tank, such as airstones, which would assist in water movement? as for reducing visible equipment in the tank here here! i've noticed 'inline heaters' which connect to external filter plumbing are beginning to appear on trademe, although i've not yet seen them in local retail shops.. they are available online from america at around USD 25.00. i won't hijack this post with a discussion on inline heaters, so will start a new post.. would like to hear anyones experiences or information about local availability.. please reply to my new post. henry Quote Link to comment Share on other sites More sharing options...
Ira Posted June 19, 2004 Report Share Posted June 19, 2004 Wait, are we talking the intake for a cannister or internal filter or the tubes for a UGF that are usually called uplift tubes? Quote Link to comment Share on other sites More sharing options...
ChrisMack Posted June 19, 2004 Author Report Share Posted June 19, 2004 Intakes, and uplift tubes! :lol: guess it really depends what you want to call them....I'm talking about an uplift/intake tube for an external canister/bucket (what ever you want to call it) filter. Thanks for the help..... ChrisMack Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.