djay Posted December 13, 2007 Report Share Posted December 13, 2007 Hi I have a Resun Magic jet filter 1000, I have a problem I'm looking for a glue that would be alright in it. The little lip peice on one side of the peice that has the spindle that goes through the shaft of propellor . Is lifting up instead of keeping it down tight. The peice you have to push down and turn to hold it all in place I hope someone can help me otherwise its probably a new filter Thanks Dianne Quote Link to comment Share on other sites More sharing options...
jim r Posted December 13, 2007 Report Share Posted December 13, 2007 Could you replace the impeller? ( never heard of Resun Magic) Quote Link to comment Share on other sites More sharing options...
Robert Smith Posted December 24, 2007 Report Share Posted December 24, 2007 Most plastics pumps etc are made from PVC. Clean the broken bits well with soap & water and maybe a toothbrush. Dry it thoroughly and then use Araldite epoxy or similar. The problem with small parts like this that are under stress is that they can break again very easily. Another possible downside is that the imperfect part can contribute to pump noise. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.