smidey Posted April 3, 2007 Report Share Posted April 3, 2007 Anyone got one of these lying around? I need one of these filter propellers. As you can see it is broken, the white top supposed to be joined to the rest of it. It is out of a shark 400L/H our filter but i found that the Micron 200L/H filter had an identical part which is now being used. Murphy's luck now i need to use the micron filter too. the magnet is 16mm long by 12mm dia. You can PM me to sort a deal Quote Link to comment Share on other sites More sharing options...
Ira Posted April 3, 2007 Report Share Posted April 3, 2007 It should work fine without it being attached well, but it will need to be in there for spacing. Or just superglue it on. Quote Link to comment Share on other sites More sharing options...
smidey Posted April 3, 2007 Author Report Share Posted April 3, 2007 It should work fine without it being attached well, but it will need to be in there for spacing. Or just superglue it on. i definately needs to be attached, the magnet spins & that white part has two points on it that stop the magnet spinning around the shaft. with it off the magnet spins but the central shaft & prop doesnt. the small shaft in the middle needs to be securely fixed to the broken white part & is too small to glue. Quote Link to comment Share on other sites More sharing options...
Ira Posted April 3, 2007 Report Share Posted April 3, 2007 Nothing is too small to glue. I have a couple 404 impellers that have the bottom bit come off, they work fine, but obviously a different construction from what you're saying. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.