Jump to content

njd

Members
  • Posts

    26
  • Joined

  • Last visited

Everything posted by njd

  1. Try one of these, http://www.heywade.com/videos/borneman.wmv or http://www.wax32.com/videos/borneman.wmv
  2. njd

    A few pic's

    Yes still the 350D,won't be getting to upgrade anytime soon. Don't know about my skills,I just take heaps of shots and try lots of settings. Took heaps of shots trying to get a pic of the tang most are a blur,only got this one when I moved back from the tank a couple of meters and he came up to the glass to see where I had gone... Cheers Nigel
  3. njd

    A few pic's

    A few more,just blue T5's Cheers Nigel
  4. njd

    tank update

    Some reading on Angels, http://reefkeeping.com/issues/2005-02/hcs3/index.php
  5. njd

    A few pic's

    Thanks everyone It can be difficult at times,I get most stuff from further north. Not yet,may do one or two soon be pretty small though. Yip 350D,just got a 100mm macro to go with it as well. I'll work on it thru the week. 1800 x 600 x 600 plus sump and refugium,3 x 250w de & 2 x 54w T5,ap-850,2 x 6100 streams.....
  6. njd

    A few pic's

    Playing with the macro lens,hand held so a little fuzzy. Cheers Nigel
  7. njd

    A few pic's

    A few pic's from the last month or so,new camera still learning. Cheers Nigel
  8. Hi PJ,You can come around and have a look at my tank if you like.May give you a few ideas and you could see skimmer etc running. I could probably part with enough liverock/sand to get your tank going as well. You could probably get frag's of most of those in town. Cheers Nigel
  9. I've got a few spare drills,could send you one if you want to have a go at diy.It's pretty easy to do,a bit hard on the nerves for the first couple of holes though.
  10. Not if it's glass you need a diamond hole saw,if its toughened glass you can't drill it.
  11. AFAIK not for a lot of years since the last one wound up. I could spread some posters around town,don't have alot of spare time to organise much though.
  12. Some little ones, These two just started fighting,sorted them out with the dremel the bottom one is about 15mm across Not all was lost,the bottom one has grown from the size the top ones are now in about 4 months
  13. I got a diamond core drill from here, http://www.topmaq.co.nz/product_list.ph ... iamondcore Your local saw doctor may have some or be able to get them in for you.
  14. njd

    Zeovit System

    When I started using salifert test kits my nitrate and phosphate were reading 0 with hagen kits with the salifert nitrate was 5 and phosphate 1.0,it may be worth getting a salifert phosphate kit you might find your levels are higher than the hagen is showing.
  15. njd

    moonlights

    I got some from http://www.dpt.co.nz/leds.html about the best price I could find at the time,they came with a resistor for 12v as well.
  16. njd

    new tank holes

    chimera are you takeing into account the outside diameter of the fittings hansen 25mm fitting is about 33mm od & 19mm fitting 25mm od.
  17. If the break is below tank level the yellow pipe will sypon until it gets air in it.
  18. njd

    Auto top-up?

    Here is a page on construction etc. http://www.melevsreef.com/dj88.html
  19. Have you tried CO2 Fire Extingishers or shops that fill them for the bottles you have got.
×
×
  • Create New...