Good morning all,
I posted here a while back about setting up a nano to replace my repurposed AR620T. (viewtopic.php?f=5&t=60547).
Anyway. I ended up not getting either of the tanks I was looking at, and instead got a custom set up, and just transplanted everything to the new tank (inc live rock etc) a week ago.
The problem is that the water is faintly cloudy. This was always a problem with the AR620T, but I just put that down to the substandard filter and lack of skimmer.
Now it has a better filter (previous was 550L/hr for a 130L tank with minimal mechanical media, now it's 750L/hr for a 110L tank with a proper sponge), and a skimmer (a crappy little Dymax, but still yielding cloudy yellowish skimmate, so I assume it's at least partially working)
The water is RO/DI, the phosphates do not register on my test kit (so less than 0.25ppm), and nitrates are only 5ppm.
There *does* seem to be a silicate issue, based on the brown dust algae growth (going to get some Astraea to deal with that, I hope)
Any thoughts as to what's causing it?
By contrast, my freshwater is crystal, crystal clear.