stephikinsfish Posted July 5, 2009 Report Share Posted July 5, 2009 I have one of these filters but the nozzle for the outlet pipe from the head unit is slightly warped out of shape and not perfectly round. Therefore it leaks slightly. Any ideas how this could be fixed. Would it be possible to remould it somehow? Quote Link to comment Share on other sites More sharing options...
WEKA Posted July 5, 2009 Report Share Posted July 5, 2009 Try taking off the locking ring and wrap the hose with PVC tape. If you wrap it tightly by stretching each wrap around you will achieve a lot of pressure and the hose should mould to the shape of the pipe. Quote Link to comment Share on other sites More sharing options...
humvee Posted July 5, 2009 Report Share Posted July 5, 2009 if it takes 12.5mm tubing, you can get it from redwood aqautics, about $8 a metre from memory (we had to replace ours about 6 months ago) very good quality tubing or you can get the same stuff from bunnings or mitre10 which is a lot cheaper, but it does kink and bend a lot easier and not in the same league as the stuff from redwoods Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.