Jump to content

redracer77

Members
  • Posts

    411
  • Joined

  • Last visited

Posts posted by redracer77

  1. Looks bacterial - similar to what bn get on their backs.

    However try google haemorragic septicaemia and see if anything comes up.

    Thanks Adrienne, I'm not sure that is the same but it could be.

    I spoke to the vet today and I am going to try to drain it and take them a sample to test.

    Hopefully it is something treatable.

  2. My female royal whiptail has what looks like blood in its lips & mouth, it has now started to spread slightly. It is worse after it eats and doesn't seem to change with different foods. It is still active and eating but not quite as active as normal. No other fish affected.

    Does anyone have any suggestions for treatment?

    sorry can't manage to get a pic of it yet.

  3. I went with a mix of 5 and 6mm holes, increased size further from the source, 17 holes spraying across/angle, 4 hole spraying down, 25mm pipe.

    Tank is 1500l x 700w.

    Seems good, I appear to only have 1 dead spot and have pointed a powerhead at it.

  4. That looks like a good set up, but I hope you've left room for the water to flow above the Poret if it clogs, overflowing sumps suck!

    How many LPH is the pump? The return line looks pretty thin.

    I think I have enough room, the water line is about 4cm below the top in the mech area, then have about 40-50l of space to take the excess when the pump is off. I also considered drilling an overflow at the top for potential overflows or overfills.

    The return is 25mm, pump is 6500lph but with head height and probably fit a ball valve will have about 3500 - 4000 lph

  5. IMAG0435.jpg

    Not completely finished but you get the idea, water comes in, through 3 layers of poret, then polisher, then over baffle through bio noodles.(middle chamber where poret off cuts are now)

    I have this setup in my basement with the tank on the other side of the wall, above left.

    My tank is drilled with 3 drains and 1 return, all 25mm Hansen fittings.

×
×
  • Create New...